Type Plates |
Plate NT150 - H, V - 0.5 mm - 1.4401 |
Plate NT150 - H, V - 0.6 mm - 1.4401 |
Plate NT150 - pH, PV - 0.5 mm - 1.4401 |
Plate NT150 - pH, PV - 0.6 mm - 1.4401 |
Characteristics of plates
One of the main parts of a plate heat exchanger of any type (folding or soldering) are plates. The heat exchanger plate is a stamped steel sheet with a thickness of 0.4 to 1.1 mm. The height and width of the plate depend on the heat exchanger size, which is selected depending on the power of the heat exchange and temperature loads.
The main characteristic of the heat exchanger plate is heat transfer coefficients (vary from 750 to 8200 W /(m 2 * 0 c) depending on the type of plate and mode The operation of the heat exchanger) and the pressure loss of the working medium during the passage of the channel formed by two adjacent plates (pressure loss varies from 0.02 to 0.8 bar, depending on the type of working medium.
To improve heat transfer plates of the heat exchanger during a stamping from a flat metal sheet, a bulk corrugated shape is given, as a result of which the plate area increases, and when two corrugated plates are connected, the heat exchanger canal with a much larger heat transfer coefficient compared to a flat sheet metal.
The most common plate thickness is 0.5 mm thick. In broad-channel heat exchangers, plates are applied to 0.9-1.1 mm thickness. The plates with a thickness of up to 0.6 mm are assembled in such a way that the point contact is provided between adjacent plates in the package of the heat exchanger plates. When applying plates from 0.8 to 1.1 mm is provided without contact assembly of the channels of the plates (the point contact between the plates is missing), as a result of which it becomes possible to pass between the channels of the collapsible plate heat exchanger of viscous media and environments with inclusions
Plates of the same size as a rule have several so-called profiles. Profile is a view of a corrugated pattern on the plate. The heat exchanger plates profiles may be rigid (such as h = high ), medium ( m = mix ) and Soft ( L = Low ). The selection of the type used in the heat exchanger plate is determined when calculating the heat exchanger to the specified parameters. So, under the condition of minimal pressure losses, L-profile plates are used, providing the passage of heat exchanger channels with minimally possible pressure losses. At the same time, if necessary, the calculation of the minimum size heat exchanger with the minimum possible area of heat exchange is used by the H-profile plates providing the highest heat transfer coefficients, but at the same time the highest pressure losses in the heat exchanger.
At the stage of calculating the heat exchanger, the E8 engineers choose the optimal and least costly options from the point of view of the manufacture of heat exchangers, which are offered for consideration by customers.
Trust the calculation of the collapsible plate heat exchanger to professionals, call +7 (499) 350-29-88.
When solving problems of any complexity at the stage of selling the supplied products or implementing a technically complex solution, there is always the problem of delivering equipment and & nbsp; materials to the buyer.
E8 has established partnerships with professionals in the field of transportation and cargo insurance, including the freight forwarding company Business Lines, ZhelDorEkspeditsiya, PEK, Baikal-Service and a number of other carriers.
Upon purchase, the goods, at the request of the customer, can be delivered both to the nearest terminal of the transport company, and directly to the customer.
When ordering the delivery of goods in the E8 company, you will receive the necessary goods as soon as possible in any point of the country convenient for you, including remote regions such as Salekhard, Magadan and Yuzhno-Sakhalinsk.
Specify the cost and terms of service by calling +7 (499) 350-29-88.
Pickup
Self-pickup is carried out from the warehouse: Moscow region, Odintsovo, st. Trekhgornaya, house 12. Mon-Fri from 9-00 to 17-00 by appointment!